Number of views:
Product serial number
|Type of Ribbon||0.08×5||0.08×7||0.12×5||0.12×7||0.12×10||0.12×20|
|Type of Copper||0.055×5||0.055×5||0.07×5||0.07×7||0.07×10||0.07×20|
According to customer requirements
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Bended Pre-cut Bus Bar
Apply to 9BB,12BB,15BB solar modules.The more bus bars and much thinner of it's width,the higher effective use of sunlight. The current density will be more even. Power increasing 5-8W sigificantly. Silver conductive paste reduce 30%
Conventional Tabbing Ribbon
Apply to 4BB,5BB solar modules. Used for auto-stringer. For cells connection.Current gathering and transmitting.
Conventional Bus Bar
Apply to connect cell tabbing wire and junction box. And transmit cell stream current.
Used for PERC,HJT,IBC high efficiency cells and so on. Use special solder composition to reduce soldering temperature to 175℃ to avoid cell crack.Other property are same with conventional ribbon.